home

  • EMS

    (element management system)

  • Core Network
    5G Core
    EPC
  • Base Station

    Indoor

    Outdoor
    5G
    Sub-6GHz
    mmWave
    LTE
  • Portable LTE

    (Network in a Box)

    Portable LTE combining
    Core Network and Base Station

    LTE

    Backpack
    Car/Ship
    Carrying

    5G

    Car Carrying
    Backpack
    mmWave
    Outdoor
    Drone
  • Korea - Public Safety Network - LTE Marine - Maritime Police - Military Japan - Enterprise Small Cell - Public Safety Network
Element Management System (EMS)
  • HTTP/TR-069 support
  • TR-181/TR-196 standard data model
  • EMS is based on web, so EMS client is not relevant
  • with OS and doesn’t require to install other SW.
  • EMS HW module redundancy can be provided.
Function Remark
Configuration Management eNodeB configuration through RPC methods
Get/Set LTE stack related parameters
Auto configuration and provisioning (ANR) Check/set parameters (add eNB, eNB operation, SW manage, neighbor manage, restart)
Status management Set GUI based on information from equipment
Fault management Alarm list/history/information
Performance management Get performance data from equipment
Check/analyze statistic information
eNB diagnostics diagnostics
SW management SW & firmware image management
System Event Records Event records
Log/history management Log/history management
Evolved Packet Core (EPC)
Capacity and Interface
function Remark
Performance - Module type (1G NIC) : 300 UEs, 350Mbps
- PC type (2 x 10G NIC) : 2K UEs, 10Gbps
- Server type (2 x 40G NIC) : 10K UEs, 24Gbps
- +400K UE data management
Function - UE/E-RAB management process
- UE authentication (AES, Snow3G, ZUC)
- Handover (S1, X2)
- Bearer management based on QCI 65, 66, 69, 70
Interface - SCTP (S1, Diameter), UDP (GTP)
- IPv4/v6 (Transport layer, assign UE IP)
- Support diameter (HSS)
Default and Option
Default Option
- Mobility Management Entity (MME)
- Serving Gateway (SGW)
- Packet Data Network Gateway (PGW)
- Home Subscriber Server (HSS)
- Policy & Charging Rules Function (PCRF) 		- Multimedia Broadcast Multicast Service Gateway (MBMS GW)
- Broadcast Multicast Service Center (BMSC)
- IP Multimedia Subsystem (IMS)
- Multicast Coordination Entity (MCE)
EL2000 e-Node B for Indoor Coverage
  • For Enterprise Indoor Customers
  • Standard : 3GPP Release 13
  • Seamless Mobility
  • Full QoS
  • 2x2 MIMO
Software Specification
Item Description
LTE Standard 3GPP Release 13
Peak Data Rate TDD
20MHz:
DL 80Mbps, UL 20Mbps (SA1)
DL 110Mbps, UL 10Mbps (SA2)
10MHz:
DL 40Mbps, UL 7Mbps (SA1)
DL 55Mbps, UL 5Mbps (SA2)
FDD 20MHz: DL 150Mbps, UL 50Mbps
10MHz: DL 75Mbps, UL 25Mbps
User Capacity TDD 100 concurrent users
(32 concurrent VoLTE users @ SA2)
FDD 200 concurrent users
(50 concurrent VoLTE users)
QoS Control 3GPP standard QCI (1~9, 65, 69)
Modulation UL: QPSK, 16QAM
DL: QPSK, 16QAM, 64QAM
Voice/Video Solution CSFB, VoLTE, Video Call, MCPTT (MC Video)
Traffic Offload IOPS, MEC
SON ANR (Automatic Neighbor Relation)
PCI confliction detection
UL Interference Detection Supported
RAN Sharing Supported
Network Management Interface TR069
Operation and Maintenance
  • Remote/local maintenance, based on SSH protocol & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • Cell Traffic Trace, Call Summary Log
Hardware Specification
Item Description Remark
Duplexing Mode FDD or TDD
Frequency Band LTE standard band Any requested bands
Carrier Configuration Single Carrier for Omni or Sector
Antenna Configuration 2T2R
Channel Bandwidth 5MHz/10MHz/15MHz/20MHz
Max, Output Power 50mW + 50mW Changeable on requests
Receiver Sensitivity -100 dBm
Synchronization GPS or IEEE1588 v2
Network Interface 100/1000 Base-T RJ-45
Installation Wall Mount
Input Power +12VDC with AC/DC Adaptor
Size (WxHxD) [mm] 200 x 200 x 70
Weight 1.5 kg
Power Consumption 34 Watt
Operating Temperature 0℃ ~ 40℃
Humidity 5% ~ 95%
EL4000 Compact e-Node B for Macro Coverage
  • Digital Unit (DU) / Radio Unit (RU) integrated
  • Standard : 3GPP Release 13
  • Seamless Mobility
  • Full QoS
  • 2x2 MIMO
  • IP-67
Software Specification
Item Description
LTE Standard 3GPP Release 13
Peak Data Rate TDD
20MHz:
DL 80Mbps, UL 20Mbps (SA1)
DL 110Mbps, UL 10Mbps (SA2)
10MHz:
DL 40Mbps, UL 7Mbps (SA1)
DL 55Mbps, UL 5Mbps (SA2)
FDD 20MHz: DL 150Mbps, UL 50Mbps
10MHz: DL 75Mbps, UL 25Mbps
User Capacity TDD 100 concurrent users
(32 concurrent VoLTE users @ SA2)
FDD 200 concurrent users
(50 concurrent VoLTE users)
QoS Control 3GPP standard QCI (1~9, 65, 69)
Modulation UL: QPSK, 16QAM
DL: QPSK, 16QAM, 64QAM
Voice/Video Solution CSFB, VoLTE, Video Call, MCPTT (MC Video)
Traffic Offload MEC
SON ANR (Automatic Neighbor Relation)
PCI confliction detection
UL Interference Detection Supported
RAN Sharing Supported
Network Management Interface TR069
Operation and Maintenance
  • Remote/local maintenance, based on SSH protocol & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • Cell Traffic Trace, Call Summary Log
Hardware Specification
Item Description Remark
Duplexing Mode FDD or TDD
Frequency Band LTE standard band Any requested bands
Carrier Configuration Single Carrier for Omni or Sector
Antenna Configuration 2T2R
Channel Bandwidth 5MHz/10MHz/15MHz/20MHz
Max, Output Power 10+10W / 20+20W Changeable on requests
Receiver Sensitivity -103 dBm
Synchronization GPS or IEEE1588 v2
Network Interface 100/1000 Base-T / 1000 Base-X RJ-45 or Optic (SFP)
Installation Wall Mount or Pole Mount
Input Power -48 VDC
Size (WxHxD) [mm] 282 x 447 x 144 without Bracket
Weight 15 kg without Bracket
Power Consumption 250 Watt at 10+10W TX power
Operating Temperature -40℃ ~ 55℃
Humidity 5% ~ 95%
EPL2000 Portable LTE System (Network in a Box)
  • For Portable Outdoor Customers
  • Standard : 3GPP Release 13
  • Seamless Mobility
  • Full QoS
  • 2x2 MIMO
  • IP 65
Software Specification
Item Description
LTE Standard 3GPP Release 13
Peak Data Rate TDD
20MHz:
DL 80Mbps, UL 20Mbps (SA1)
DL 110Mbps, UL 10Mbps (SA2)
10MHz:
DL 40Mbps, UL 7Mbps (SA1)
DL 55Mbps, UL 5Mbps (SA2)
FDD 20MHz: DL 150Mbps, UL 50Mbps
10MHz: DL 75Mbps, UL 25Mbps
User Capacity TDD 100 concurrent users
(32 concurrent VoLTE users @ SA2)
FDD 200 concurrent users
(50 concurrent VoLTE users)
QoS Control 3GPP standard QCI (1~9, 65, 69)
Modulation UL: QPSK, 16QAM
DL: QPSK, 16QAM, 64QAM
Voice/Video Solution CSFB, VoLTE, Video Call, MCPTT (MC Video)
Traffic Offload IOPS, MEC
SON ANR (Automatic Neighbor Relation)
PCI confliction detection
UL Interference Detection Supported
RAN Sharing Supported
Network Management Interface TR069
Operation and Maintenance
  • Remote/local maintenance, based on SSH protocol & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • Cell Traffic Trace, Call Summary Log
Hardware Specification
Item Description Remark
Duplexing Mode FDD or TDD
Frequency Band LTE standard band Any requested bands
Carrier Configuration Single Carrier
Antenna Configuration 2T2R
Channel Bandwidth 5MHz/10MHz/15MHz/20MHz
Max, Output Power 4W + 4W Changeable on requests
Receiver Sensitivity -100 dBm
Synchronization GPS
Network Interface 100/1000 Base-T,
1000Base-X (SFP) 		RJ-45, optic
Installation Backpack
Input Power Battery type + AC 110/220V
Size (WxHxD) [mm] 295 x 553 x 173 With battery/bag/frame
Weight 10.5 kg Without battery
Power Consumption 130 Watt (typical)
Operating Temperature -30 ~ +50℃
Humidity IP 65
External Interface Port Description
Portable LTE System : EPL4128-1401
  • eNodeB : Digital Unit (DU) / Radio Unit (RU) integrated
  • EPC : MME, S-GW, P-GW, HSS, PCRF
  • App Servers (option) : IMS, PTT
  • Isolated E-UTRAN Operation for Public Safety (IOPS)
  • Standard : 3GPP Release 13
  • Freq. Band : FDD LTE Standard Band
  • CH. BW : 10 MHz
  • MIMO : 2x2
  • Seamless mobility
  • Full QoS
  • SON
  • Sync. : GPS
  • IP-65 (excluding FANs)
Parameter Value Comments
BTS Configuration Single Carrier
Network Interface 100/1000BaseT
1000Base-X 		RJ-45 Receptacle
SFP Receptacle
Max, Output Power 20W + 20W Can be Changed
Installation Rack Mount
Input Power -48VDC
Size(WxHxD) [mm] 19” x 204 x 450 Including FAN Units
Weight 25kg Including FAN Units
Power Consumption 350 Watt (typical) Including FAN Units
Operating Temperature -30 ~ +50℃ Including FAN Units
External Interface Port Description
No. Port Name Connector Type Comments
1 Tx CPL SMA Female TX 40dB Coupling Port
2 ANT1, ANT2 N-Type Female x 2 2T/2R RF Antenna Port
3 GPS N-Type Female GPS Antenna Port
4 EPC_DBG RJ45 Receptacle Internal EPC Debug Port
5 PTT_DBG RJ45 Receptacle Internal PTT Debug Port
6 B/H RJ45 Receptacle Backhaul, 1000Base-T
7 PDN RJ45 Receptacle 1000Base-T
8 FAN DC IN External FAN Unit Power
9 On/Off switch 1NT1-2G System Power Switch
10 D/C IN MS3012A 16-11P Receptacle -48VDC Power
11 Optic SFP Receptacle Optic Backhaul, 1000Base-X
12 LAN RJ45 Receptacle 1000Base-T
13 LMT RJ45 Receptacle 1000Base-T
14 SYNC SMA Female Test Port
15 10MHz SMA Female Test Port
16 Status LED System Status LED
Network in a Box (backpack)
  • CU (core unit) / DU (digital unit) / RU (radio unit) integrated
  • 5GC integrated
  • App Servers(option): IP-PTT
  • Standard : 3GPP Release 16
  • Freq. Band : TDD, 4.72~4.82GHz (N79)
  • Ch. BW. : 20/100 MHz
  • MIMO : 2x2
  • Sync. : GPS or IEEE1588v2
  • IP65
Software Specification
5G Capability Release 16
Standard Support 3GPP 5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL: 1Ghps, UL: 800 Mbps (DDSUU, 2* 100MHz)
Modulation QPSK, 16QAM, 64QAM, 256QAM
Component carrier BW 20, 40, 100 MHz
Max. Bandwidth (OBW) DL: 2*100 MHz, UL: 2*100 MHz
Instantaneous BW (IBW) 200 MHz
Sub-carrier spacing 30 kHz
MIMO layers DL:2, UL:2
Antennas (Tx/Rx) 2Tx 2Rx
TTI duration 0.5 ms
# Users/TTI DL/UL: 8 users/TTI
Spectrum support n41, n48, n77, n78, n79
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Parameter Value Comments
Network Interface 10G Base-X
2.5G base-T
Max, Output Power 33dBm + 33dBm
Installation Backpack
Input Power DC +24V
Size(WxHxD) [mm] 464 x 260 x 122 [mm]
Weight <10kg Without batteries
Power Consumption 110 Watt (typical)
Operating Temperature -20℃ ~ +50℃
Network in a Box (Car Carrying)
  • CU (core unit) / DU (digital unit) / RU (radio unit) integrated
  • Standard : 3GPP Release 16
  • Freq. Band : TDD, 4.72 ~ 4.82GHz
  • Ch. BW. : 20/100 MHz
  • MIMO : 2x2
  • Sync. : GPS or IEEE1588v2
  • IP65
Software Specification
5G Capability Release 16
Standard Support 3GPP 5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL: 1Ghps, UL: 800 Mbps (DDSUU, 2* 100MHz)
Modulation QPSK, 16QAM, 64QAM, 256QAM
Component carrier BW 20, 40, 100 MHz
Max. Bandwidth (OBW) DL: 2*100 MHz, UL: 2*100 MHz
Instantaneous BW (IBW) 200 MHz
Sub-carrier spacing 30 kHz
MIMO layers DL:2, UL:2
Antennas (Tx/Rx) 2Tx 2Rx
TTI duration 0.5 ms
# Users/TTI DL/UL: 8 users/TTI
Spectrum support n41, n48, n77, n78, n79
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Parameter Value Comments
Network Interface 10G base-X
2.5G base-T
Max, Output Power 43dBm + 43dBm
Installation 19” rack amount or Table mount
Input Power DC +28V
Size(WxHxD) [mm] 429 x 385 x 155 [mm]
Weight <25kg
Power Consumption 230 Watt (typical)
Operating Temperature -30 ~ +50℃
Portable 5G System (Network in a Box)
  • CU (core unit) / DU (digital unit) / RU (radio unit) integrated
  • 5GC integrated
  • App Servers(option): IP-PTT
  • Standard : 3GPP Release 16
  • Freq. Band : TDD, 4.72~4.82GHz (N79)
  • Ch. BW. : 20/100 MHz
  • MIMO : 2x2
  • IP65
Software Specification
5G Capability Release 16
Standard Support 3GPP 5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL: 1Ghps, UL: 800 Mbps (DDSUU, 2* 100MHz)
Modulation QPSK, 16QAM, 64QAM, 256QAM
Component carrier BW 20, 40, 100 MHz
Max. Bandwidth (OBW) DL: 2*100 MHz, UL: 2*100 MHz
Instantaneous BW (IBW) 200 MHz
Sub-carrier spacing 30 kHz
MIMO layers DL:2, UL:2
Antennas (Tx/Rx) 2Tx 2Rx
TTI duration 0.5 ms
# Users/TTI DL/UL: 8 users/TTI
Spectrum support n41, n48, n77, n78, n79
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Parameter Value Comments
Network Interface 2.5G base-T
Max, Output Power 30dBm + 30dBm
Installation Drone(Ceiling) mount
Input Power DC +12V
Size(WxHxD) [mm] 400 x 250 x 127 [mm]
Weight <6kg
Power Consumption 95 Watt (typical)
Operating Temperature -30℃ ~ +50℃
EUCAST 5G Product - mmWave 5G Outdoor RAN
  • CU (core unit) / DU (digital unit) / RU (radio unit) integrated
  • Standard : 3GPP Release 16
  • Freq. Band : TDD, N257
  • 5G NR NSA (EN-DC)
  • NR-DC (NR NR Dual Connectivity)
  • Ch. BW. : 4 * 100 MHz
  • Antenna : 128Tx 128Rx
  • Sync. : GPS or IEEE1588v2
  • IP65
Software Specification
5G Capability Release 16
Standard Support 3GPP 5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL: 2.2 Ghps, UL: 200 Mbps
Modulation 64 QAM
Component carrier BW 100 MHz
Max. Bandwidth (OBW) DL: 400 MHz (4CC), UL: 400 MHz (4CC)
Instantaneous BW (IBW) 800 MHz
Sub-carrier spacing 120 kHz
MIMO layers DL:2, UL:1
Antennas (Tx/Rx) 128Tx 128Rx
TTI duration 0.125 ms
# Users/TTI DL/UL: 2 users/TTI
Spectrum support 26.5~29.5GHz, 37.0~40.0GHz (n257, n258(partial), n260, n261)
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Parameter Value Comments
Frequency(Band) 28GHz(n257): 26.5~29.5GHz -
Network Interface 10Gbps SFP+ 802.3 10G Base- X
Max, Output Power EIRP 48dBm (64QAM)
Installation Wall mount
Input Power DC +28V
Size(WxHxD) [mm] 291 x 270 x 54 [mm]
Weight <4.5kg
Power Consumption 55 Watt (typical)
Operating Temperature -5℃ ~ +40℃
5G Core
  • Standard : 3GPP Release 16
  • Core Network that supports SA mode
  • Support Protocol : N1, N2, N3, N4, N6, N8, N11, N12, N13
  • Node : AMF, SMF, UPF, AUSF, UDM
  • Support 300 to 100K UEs
Main Features
  • N1 Interface with UEs (5GMM/5GSM)
  • N2 Interface Functionality for gNB and Control Plane Message Processing (NGAP)
  • N3 Interface Functionality for Processing User Plane Messages with gNB
  • N2 Interface-Based PDU Session Setup & Release Features
  • Network Registration/Deregistration Capabilities of UEs
  • Session Management capabilities on UE
  • UE IP Address Assignment and Management Features
  • UE Identification, Access Authorization & Authentication Capabilities
  • Packet Routing and Forwarding Capabilities
  • External Interface Capabilities with Data Network
  • QoS Handling Capabilities for User Planes
  • IDLE-ACTIVE State Transition Control Function of the UEs
  • Downlink Packet Buffering & Paging Triggering Capabilities
  • Handover Function
  • UE Context Management Features
Capacity and interface
Functions Remark
Performance - Module type (1G NIC) : 300 UEs, 350Mbps
- PC type (2 x 10G NIC) : 2K UEs, 10Gbps
- Server type (2 x 40G NIC) : 100K UEs, 24Gbps
- +400K UE data management
Function - UE/PDU Session management process
- UE authentication (AES, Snow3G, ZUC)
- Handover (NG/Xn)
- QoS Flow Management
Interface - SCTP (S1, Diameter), UDP (GTP)
- IPv4/v6 (Transport layer, assign UE IP)
Default and Option
Default Option
Performance - Access and Mobility Management Function (AMF)
- Session Management Function (SMF)
- User Plane Function (UPF)
- Unified Data Management (UDM)
- Authentication Server Function (AUSF)
Option - Policy Control Function (PCF)
- IP Multimedia Subsystem (IMS)
- Mobile Edge Computing (MEC)
EUCAST 5G Product - sub 6 small cell
  • CU / DU / RU integrated
  • Standard : 3GPP Release 16
  • 5G NR SA
  • Max 128 connected, 64 active users
  • Sync. : GPS or IEEE1588v2
Capacity and interface
5G Capability Release 16
Standard Support 3GPP 5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL 500Mbps, UL 400Mbps (DDSUU) (100MHz BW)
Max. Modulation DL/UL: 256 QAM
Component carrier BW 100 MHz
Bandwidth (OBW) 100MHz
Sub-carrier spacing 30 kHz
MIMO layers DL:2, UL:2
Antennas (Tx/Rx) 2Tx 2Rx
TTI duration 0.5ms
# Users/TTI DL/UL: 8 users/TTI
Concurrent UE 64 active
Availability/Redundancy NG-Flex (AMF Pooling)
Spectrum support N77, n78, n79, and etc.
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Item Description Remark
Frequency Range 4720~4820MHz
Maximum Transmitter Power 200mW/ANT, 2T2R
Antenna Config. 2x2 MIMO
Backhaul 1000Base-T × 1
Power AC adaptor : AC 100~240V, 50/60Hz DC 12V Using AC/DC adaptor
Power Consumption(Avg) Typ. 50W
Size(mm) 200mm(W) *200mm(H) *70mm(D) Excluding protrusion
Weight < 2 kg
Volume 2.8L
GPS Interface L1 band
Frequency Range 4720~4820MHz
Maximum Transmitter Power 200mW/ANT, 2T2R
EUCAST 5G Product - mmWave 5G small cell
  • CU / DU / RU integrated
  • Standard : 3GPP Release 16
  • 5G NR NSA (EN-DC)
  • NR-DC (NR NR Dual Connectivity)
  • Sync. : GPS or IEEE1588v2
Software Specification
5G Capability FSM10055
Standard Support 3GPP5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL: 2.2 Gbps, UL: 200 Mbps
Max. Modulation 64 QAM
Component carrier BW 100 MHz
Max. Bandwidth (OBW) DL:400 MHz, UL: 400 MHz
Instantaneous BW (IBW) 800 MHz
Sub-carrier spacing 120 kHz
MIMO layers DL: 2, UL: 1
Antennas (Tx/Rx) Upto 128Tx 128Rxs
TTI duration 0.125ms
# Users/TTI DL/UL: 2 users/TTI
Spectrum support 26.5-29.5 GHz, 37.0-40.0 GHz (n257, n258[partial], n260, n261)
Release time
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Item Description Remark
Frequency (Band) 28GHz (n257) : 26.5~29.5GHz
Maximum Tx Power EIRP 50dBm (64QAM)
Bandwidth 800MHz (2*400MHz or 8*100MHz)
Modulation QPSK/16QAM/64QAM
Antenna 128T/128R DL: 2 layer, UL: 1 layer
Backhaul 10Gbps SFP+ 802.3 10GBase-X
Power AC adaptor : AC 100~240V, 50/60Hz DC 12V Using AC/DC adaptor
Power Consumption <75W
Size (mm) 275(W) x 275(D) x 50(H)
Weight 3.5 Kg
Temperature -5 ~ +40°C
Installation Wall Mount
Sub 6 GHz 5G Outdoor RAN
  • CU / DU / RU integrated
  • Standard : 3GPP Release 16
  • 5G NR SA, NR-DC
  • Max 128 connected, 64 active users
  • Sync. : GPS or IEEE1588v2
Software Specification
5G Capability Release 16
Standard Support 3GPP 5G-NR Rel-16
Duplexing mode TDD
Peak throughput DL: 1Gbps, UL: 800 Mbps (DDSUU, 2* 100MHz)
Modulation QPSK, 16QAM, 64QAM, 256 QAM
Component carrier BW 20, 40, 100 MHz
Max. Bandwidth (OBW) DL: 2*100 MHz, UL: 2*100 MHz
Instantaneous BW (IBW) 200 MHz
Sub-carrier spacing 30 kHz
MIMO layers DL:2, UL:2
Antennas (Tx/Rx) 2Tx 2Rx
TTI duration 0.5 ms
# Users/TTI DL/UL: 8 users/TTI
Spectrum support n41, n48, n77, n78, n79
Operation and Maintenance
  • Remote/local maintenance, based on SSH & web interface
  • Remote maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Configuration management
  • Local or remote software upgrading and loading
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • KPI Recording
  • OAM/EMS integration: NETCONF YANG
Hardware Specification
Item Description Remark
Frequency (Band) Sub 6GHz n41, n48, n77, n78, n79
Maximum Tx Power 43 dBm per antenna port
Bandwidth 20MHz/100MHz
Modulation QPSK/16QAM/64QAM/256QAM
Antenna 2T/2R DL: 2 layer, UL: 2 layer
Backhaul 1000 Base-T / 1000 Base-X RJ-45 or Optic (SFP)
Power -48VDC
Power Consumption 230 W
Size (mm) 250(W) x 350(D) x 100(H)
Weight 8 Kg
Temperature -40 ~ + 55°C